Synthetic Wood Adhesive

• Bluecoat Plus is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications.
• For bonding Plywood/ MDF /Particle board etc with each other & also bonding with Laminate/Veneer etc.
• For Edge Bonding, Finger Jointing and Wooden Flooring (where water seepage is not present)
  

• The surface to be bonded should be properly leveled, free from oil/ grease/dust &excess moisture. For best results roughen the surfaces to be bonded.
• Apply even coat of adhesive on both the surfaces. Adhesive should be applied first on the non-porous surface and then on the porous surface with the help of spreader, roller or brush.
• The entire process of application & pressing should be complete within 10 minutes.
• Both surfaces are now brought together with proper alignment and pressed firmly to ensure uniform contact & even spreading of adhesive.
• Bonded area should be kept under pressure with help of tapes, nails, clamps or support.
• Any excess adhesive should be wiped out with a wet cloth immediately.
• Pressure can be removed after 8 hours and put to use. Complete curing is achieved in 24 Hrs.
  

• Suitable for Vertical/ Horizontal applications.
• Excellent spreadability for better coverage.
• Non Hazardous / non inflammable and free from harmful solvents.
• Prolonged shelf life without affecting the quality on storage.
• Economical in long run.
• Special preservative used to protect adhesive from any bacterial growth during storage.
• Single component adhesive.
• "Zero Wastage Pack" - New International bucket packing with an inbuilt small lead on the main cap for minimum wastage, free from dust, grease, any foreign particle and for minimum skin formation.
• Conforms to DIN/EN204D2, & IS4835:1979/97/99 (as per Indian Institute of Packaging).
  

• Bluecoat Plus is manufactured by advanced German Technology.
• Superior water resistance adhesive.
• High Initial Tack for strong grip.
• More penetration power into pores for strength.
• Heat, Water and fungal resistant.
• Micro-bonding Effect.
• More open time
• PH balanced.
  

• When not in use, keep the container closed.
• Skin formation if any should be removed before use.
• Water should not be added for dilution, as it may adversely affect the performance of product.
• Stir the contents of the container well before use.
  

Storage
Store Away from direct heat & Sunlight.

Shelf Life
1 Year from date of Mfg., under recommended storage conditions & in a sealed container.

Packing

• Available in the packs of 1kg, 2kg, 5kg, 10kg, 15kg, 20kg, 25kg, 30kg, 50kg
• New International packing with an in-built small lead on the main cap for minimum wastage, free from dust/grease / foreign particle and minimum skin formation.